Page 1 of 1

Freeciv server does not start (2.5.9, MacOS 10.12.6, Fink)

Posted: Sun Sep 02, 2018 7:36 pm
by vbl
Hi, after installing this (not completely new) version using the fink distribution for MacOS, I found that the freeciv-server will not start, with the following error:

> freeciv-server
This is the server for Freeciv version 2.5.9
You can learn a lot about Freeciv at http://www.freeciv.org/
0: Server: bad address: <(none):5556>.

This does not sound too cryptic, but what might be the reason?

Best wishes
Volker Blum

Re: Freeciv server does not start (2.5.9, MacOS 10.12.6, Fink)

Posted: Mon Sep 03, 2018 9:15 pm
by mir3x
Looks like it cannot use any network address or maybe given port is used.
try:
freeciv-server -b 127.0.0.1
or
freeciv-server -p 15550

Probably server is badly built, try that Mac installers from here : http://forum.freeciv.org/f/viewforum.php?f=4 ?

Re: Freeciv server does not start (2.5.9, MacOS 10.12.6, Fink)

Posted: Sun Sep 09, 2018 2:08 am
by vbl
Thank you! Yes, it seems that changing the port or the host do not help. Will try with a different build.

Well, nethack from the same source also does not work so I am out of options!

Best wishes and thanks again!

Re: Freeciv server does not start (2.5.9, MacOS 10.12.6, Fink)

Posted: Sun Sep 09, 2018 2:15 am
by vbl
The Mac installer for 2.6.0 did work - thank you!