How to run a multiplayer server?
-
- Posts: 18
- Joined: Fri Jun 02, 2017 5:17 pm
Re: How to run a multiplayer server?
Louis, thank you for the most helpful advice I've received as of yet. Our friends keep getting connection errors when they try to join. I cannot quote them verbatim, but something along the lines of, "Failed to connect because the host server took too long to respond or..." something like that. We are civ veterans who happened upon FreeCiv and we are really trying to make this work.
Re: How to run a multiplayer server?
Just getting other people to connect to your public IP is unlikely to work if you're on a normal ISP, because of NAT and firewalls (or at least this is the problem that people usually seem to have). The FAQ talks about this a bit more, but doesn't give a step-by-step guide as it depends on your setup and equipment.
I think you are likely to have to muck around in your router's configuration to forward the Freeciv port from the outside world to the machine running the server.
I think you are likely to have to muck around in your router's configuration to forward the Freeciv port from the outside world to the machine running the server.
-
- Posts: 18
- Joined: Fri Jun 02, 2017 5:17 pm
Re: How to run a multiplayer server?
"Safely bypassing NAT and firewalls is beyond the scope of this FAQ."
Well, it's a shame that this has to be so complicated. What a waste of time and effort. I have given up. Farewell and happy civing.
Well, it's a shame that this has to be so complicated. What a waste of time and effort. I have given up. Farewell and happy civing.
Re: How to run a multiplayer server?
That's because it depends on the Internet box you have, and there are hundreds of models out there.The wiki wrote:Safely bypassing NAT and firewalls is beyond the scope of this FAQ.
It's complicated because running a server makes your computer more vulnerable to attacks. Your ISP protects you by forbidding connexions from the outer world. That's why your friends couldn't connect to your server. Most boxes allow to bypass this protection, but the procedure to setup the bypass depends on the box model.NateDogPack12 wrote:Well, it's a shame that this has to be so complicated. What a waste of time and effort.
We could maybe help if you told us the model of you Internet box. It's usually written somewhere on the box itself and in the configuration interface.
Louis